WS2811 RGB COB Running water LED strip 12V 24V Addressable Touch Control kit

Description: RGB IC COB Running Water LED Strip Light WS2811 5M 10M 12V DC24V Addressable Dream Color Horse Race Touch Remote Control LampDESCRIPTION *** RGBIC Digital LED Strip LightProduct Name: Addressable COB RGB IC Led stripLED Type: COBIC Type: WS2811LED Qty: 720LEDs/mLED Color: RGBWorking Voltage: DC 24V /DCV12Power: 12W-15W/MPCB Width: 10mmWaterproof Rate: IP30 Non-WaterproofPackage: 5M/RollRGB Wire-Order: + RBGConnection:Red Wire ---- DC24V (+)Green Wire --- Digital WireWhite Wire --- GND wire (-)*** RGB IC RF Touch LED ControllerWorking Voltage: DC 5-24VMax Control Pixels <2048 PixelsEffects Modes: 376 kinds of different modes.Most of effects are running water when you turn ON. Also with Pause and Auto-play function.Battery Type: CR2025 ( The remote is not with battery)8 Keys Function: ON/OFF , Speed UP/Down, Mode+/Mode-, MENU, Brightness UP/Down, Touch color ring in the middle to adjust the static color.Remote Distance: 20 MetersHow to adjust the pixel number ?Step 1: Power Off the lights.Step 2: Long press " MENU" 5 seconds enter into pixel setting menuStep 3: Press "Mode+" to increase the pixels number,till the whole led strip are light ON. Press "Mode-" to decrease the pixel number.Step 4: Press "ON/OFF" key to Save !Default Factory pixel number is 305pcs, max increase to 2048pixels. If the led strip is more than 2048pcs pixels, just add another amplifier .How to adjust the wire-Order of RGB led strip ?Each factory maybe have a different wire-order for RGB led strip, normally it is +RBG,+GRB,+GBR,+RGB,etc. If you press Red, the Led strip light Green or Blue color, that means you have to adjust the wire-order of led strip light.Let us do as the following steps:Step 1: Power OFF the lightsStep 2: Long press " MENU" 5 seconds enter into the setting menu.Step 3: Press " Bright +" to adjust the order,till the led strip are Sequentially light RED, Green, Blue order. Press " Bright-" to reset the order (Convenient batch adjustment).Step 4: Press " ON/OFF" key to Save.How to pair the remote to the controller, make it work independently ,never disturbed each other?Learning:Step 1: Cut OFF the power supply.Step 2: Long Press "MODE+",meanwhile Powering -ON, the led strip will quick flash 3 times. learing sucessfully. Now only the just learning remote can control this controller, others cannot.Delete:Step 1: Cut OFF the power supply.Step 2: Long press " Speed+", meanwhile Powering ON. the led strip will slow flash 3 times, delete sucessfully. Now all remote controls are universal.*** Power SupplyWe used led power supply,with high quality power supply, 100% enough power outputs,stable and long-life span.The Power : 100W / 200WInput Voltage: 100-265V AC, widely voltage used.Output Voltage: DC 24VHow to choose the power supply ? we suggest.1pc 100W power supply can used for 5M (Max.60W) 24V 720LEDs/m RGBIC Led Strip Lights.1pc 200W power supply can used for 10M(Max.W 120w-180w) 24V 720LEDs/m RGBIC Led Strip Lights.1pc 200W power supply can used for 5M-10M (Max.120W-180W) 24V 720LEDs/m RGBIC Led Strip Lights.IF your projects is more than 20m, we suggest you can add some extra power supply in another end of led strip, to avoide the voltage-drop, so that to keep the same of the whole led strip.The each 5M led strip with male female connectors and power cable, they can be connected together by male female connectors. so that the led strip looks like a straight line.If you find the color or brightness are different from the beginning to the end when it is static mode, it maybe need to add extra power supply. Or connect all power cable from led strip to the power supply to solve it.

Price: 6.76 USD

Location: 深圳

End Time: 2024-02-17T04:01:51.000Z

Shipping Cost: 2.3 USD