Description: BRAND NEW SET of EIGHT GM Original Equipment FUEL INJECTORS for Chevrolet GMC, Cadillac & Hummer 4.8L & 5.3L 2010-2015 OE #12613411(see specific application data below) **** ONE YEAR WARRANTY **** Price is for the full set of injectors.Quantity available is the number of sets we have. Please Note: these are Brand New OEM Fuel Injectors. They are not remanufactured parts, take-offs, or cheap Chinese knock-off parts. Inferior quality Chinese parts are all over eBay now. So Caveat Emptor … Buyer Beware! Fake injectors do not have any manufacturer’s I.D. symbols or component production codes on them. They do not meet OEM specs and do not last. If the photos do not allow a clear enough view to verify their authenticity do not buy them. They are junk!We only sell these in flow matched sets. There are other suppliers offering these injectors but the are not matching them. Did you know that new OE injector flow rates can vary? We flow test and match every injector to be within 1% of each other.Fits these vehicles: Cadillac Escalade 2010-2013 2010 ELECTRIC/FLEX VIN:J 2011 ELECTRIC/FLEX VIN:J 2012 ELECTRIC/FLEX VIN:J 2013 ELECTRIC/FLEX VIN:J Chevrolet Avalanche 2010-2013 2010 5.3L V8 VIN:0,7 2011 5.3L V8 VIN:0,7 2012 5.3L V8 VIN:0,7 2013 5.3L V8 VIN:0,7 Colorado 2010-2012 2010 5.3L V8 VIN:P 2011 5.3L V8 VIN:P 2012 5.3L V8 VIN:P Express 1500 2010-2014 2010 5.3L V8 FLEX VIN:4 2011 5.3L V8 FLEX VIN:4 2012 5.3L V8 FLEX VIN:4 2013 5.3L V8 FLEX VIN:4 2014 5.3L V8 FLEX VIN:4 Express 2500 2010-2015 2010 4.8L V8 FLEX VIN:A 2011 4.8L V8 FLEX VIN:A 2012 4.8L V8 FLEX VIN:A 2013 4.8L V8 FLEX VIN:A 2014 4.8L V8 FLEX VIN:A 2015 4.8L V8 VIN:F Express 3500 2010-2015 2010 4.8L V8 FLEX VIN:A 2011 4.8L V8 FLEX VIN:A 2012 4.8L V8 FLEX VIN:A 2013 4.8L V8 FLEX VIN:A 2014 4.8L V8 FLEX VIN:A 2015 4.8L V8 VIN:F Silverado 1500 2010-2013 2010 5.3L V8 VIN:0,7 2010 4.8L V8 FLEX VIN:A 2010 ELECTRIC/FLEX VIN:J 2011 5.3L V8 VIN:0,7 2011 4.8L V8 FLEX VIN:A 2011 ELECTRIC/FLEX VIN:J 2012 5.3L V8 VIN:0,7 2012 4.8L V8 FLEX VIN:A 2012 ELECTRIC/FLEX VIN:J 2013 5.3L V8 VIN:0,7 2013 4.8L V8 FLEX VIN:A 2013 ELECTRIC/FLEX VIN:J Suburban 1500 2010-2014 2010 5.3L V8 VIN:0,7 2011 5.3L V8 VIN:0,7 2012 5.3L V8 VIN:0,7 2013 5.3L V8 VIN:0,7 2014 5.3L V8 VIN:0,7 Tahoe 2010-2014 2010 5.3L V8 VIN:0,7 2010 ELECTRIC/FLEX VIN:J 2011 5.3L V8 VIN:0,7 2011 ELECTRIC/FLEX VIN:J 2012 5.3L V8 VIN:0,7 2012 ELECTRIC/FLEX VIN:J 2013 5.3L V8 VIN:0,7 2013 ELECTRIC/FLEX VIN:J 2014 5.3L V8 VIN:0,7 GMC Canyon 2010-2012 2010 5.3L V8 VIN:P 2011 5.3L V8 VIN:P 2012 5.3L V8 VIN:P Savana 1500 2010-2014 2010 5.3L V8 FLEX VIN:4 2011 5.3L V8 FLEX VIN:4 2012 5.3L V8 FLEX VIN:4 2013 5.3L V8 FLEX VIN:4 2014 5.3L V8 FLEX VIN:4 Savana 2500 2010-2015 2010 4.8L V8 FLEX VIN:A 2011 4.8L V8 FLEX VIN:A 2012 4.8L V8 FLEX VIN:A 2013 4.8L V8 FLEX VIN:A 2014 4.8L V8 FLEX VIN:A 2015 4.8L V8 VIN:F Savana 3500 2010-2015 2010 4.8L V8 FLEX VIN:A 2011 4.8L V8 FLEX VIN:A 2012 4.8L V8 FLEX VIN:A 2013 4.8L V8 FLEX VIN:A 2014 4.8L V8 FLEX VIN:A 2015 4.8L V8 VIN:F Sierra 1500 2010-2013 2010 5.3L V8 VIN:0,7 2010 4.8L V8 FLEX VIN:A 2010 ELECTRIC/FLEX VIN:J 2011 5.3L V8 VIN:0,7 2011 4.8L V8 FLEX VIN:A 2011 ELECTRIC/FLEX VIN:J 2012 5.3L V8 VIN:0,7 2012 4.8L V8 FLEX VIN:A 2012 ELECTRIC/FLEX VIN:J 2013 5.3L V8 VIN:0,7 2013 4.8L V8 FLEX VIN:A 2013 ELECTRIC/FLEX VIN:J Yukon 2010-2014 2010 5.3L V8 VIN:0,7 2010 ELECTRIC/FLEX VIN:J 2011 5.3L V8 VIN:0,7 2011 ELECTRIC/FLEX VIN:J 2012 5.3L V8 VIN:0,7 2012 ELECTRIC/FLEX VIN:J 2013 5.3L V8 VIN:0,7 2013 ELECTRIC/FLEX VIN:J 2014 5.3L V8 VIN:0,7 Yukon XL 1500 2010-2014 2010 5.3L V8 VIN:0,7 2011 5.3L V8 VIN:0,7 2012 5.3L V8 VIN:0,7 2013 5.3L V8 VIN:0,7 2014 5.3L V8 VIN:0,7 Hummer H3 2010-2010 2010 5.3L V8 VIN:P 2010 5.3L V8 FLEX VIN:P H3T 2010-2010 2010 5.3L V8 VIN:P 2010 5.3L V8 FLEX VIN:P If noted above, VIN # to check is the 8th digit If your vehicle is listed here, these parts are the correct injector. All the application & interchange information was researched and verified by Wrenchhead's NEXCAT Electronic Catalog & database. NEXCAT is the major provider of Electronic Data to Auto Parts Retailers & Professional Installers in North America. FAQ’s Q) Are your fuel injectors really “BRAND NEW” parts?A) We specialize in selling Brand New injectors at extremely low prices, but also offer Factory Remanufactured fuel injector sets. All of my Ebay listings are clearly and accurately described as either “Brand New OEM Injectors”, “Brand New Injectors” or as “Factory Remanufactured Injectors”. We are also the exclusive online distributor for “Xtreme High Performance” and “Xtreme Upgrade” product line of Fuel Injectors. All of the Factory Remanufactured Injectors we sell are professionally remanufactured at the 2nd largest Fuel Injector Remanufacturing Production facility in North America using state-of-the-art calibrated equipment to meet all original electrical and fuel flow specifications. We purchase our Brand New fuel injectors in bulk or large quantities directly from the OEM manufacturers or other reputable source, so most are not individually boxed for resale, unless noted as such. As a final Quality Control measure, every injector we ship, including Brand New injectors, are 100% bench tested and flow matched before shipment to the customer. This includes a final Spray Pattern Test performed with an industry approved, non toxic, fuel injector Test Solvent ... it is not gasoline and it does not indicate that the injectors are “used”. Q) How can you sell BRAND NEW fuel injectors so cheap?A) We get asked this question often. Having been in the Auto Parts business for over 40 years, I’ve worked for Warehouse Distributors, owned & operated Retail Auto Parts Stores, served in a Regional and National Management capacity for three Major Auto Parts Manufacturers and also pioneered an Internet Auto Parts web site in 1998. I am now semi-retired. Selling on Ebay is a part-time venture as an associate broker and consultant for the # 2 Fuel Injector Remanufacturer in the U.S. We purchase large quantities of Brand New fuel injectors and other fuel system components directly from the OE manufacturers here in the USA, Japan and Europe. As veterans of the auto parts industry, we know where & how to buy in quantity, and there are some incredible deals available to the insiders! It is common practice for reputable rebuilders to purchase new parts and package them in their “Remanufactured” boxes. This is done out of necessity when serviceable cores (used parts) are not readily available to maintain a good “order fill” percentage for their repeat wholesale customers. In other words, you can’t remanufacture a part you don’t have. Additionally, some OEM fuel injectors simply can not be remanufactured with any degree of reliability due to inherent design flaws. In those cases brand new parts must be sold. We also periodically buy overstocks & stock lift inventories from Warehouse Distributors. Thousands of part numbers are needed to cover the entire fuel injector universe but not all are available at our targeted low acquisition cost. Please note that we absolutely do not buy or sell any cheap Chinese knock-off parts or any Aftermarket brand that is less than OEM Quality, period! Q) How do I know that these parts are correct for my vehicle?A) Every part we sell on Ebay is thoroughly researched and cross referenced using Wrenchhead’s NexCat electronic database and matched to OEM manufacturer’s production data. NexCat is a professional & expensive Subscription Only electronic auto parts catalog and informational database service used nationwide by major auto parts manufacturers, wholesalers and retailers. Please note that all car companies are notorious for superseding and duplicating OE parts with new numbers from year to year when in fact, the parts are carry-overs, identical and completely interchangeable. Also note that the number stamped in or printed on a fuel injector is NOT necessarily the OE part number. It can also be a component or casting/molding number. Cosmetic (color) changes & minor modifications are also common over a part’s application & life cycle, resulting in multiple part numbers that are identical specs. We also offer some fuel injectors that may look slightly different than your OE parts but are the same electrical & flow specs and critical dimensions. Those are noted as such in their listings. Don’t just assume that because the injector “looks different” that it will not work. Example: we offer Brand New Denso, Bosch and Siemens-Deka injectors for certain GM, Ford and Chrysler vehicles that are truly an upgrade in quality compared to the OEM injectors and may look a bit different. The bottom line is that if we list a part as fitting your particular vehicle, it will fit and perform as good as or better than the parts you remove …Guaranteed. After 20 + years specializing in the Fuel Injection business, with large wholesale customers all around the world, perfection and accuracy is a necessity. Q) What is the difference in a Brand New OEM part vs. a Brand New Aftermarket part? A) OEM parts are made by several different fuel injector manufacturers, contracted by the car companies to supply them. Most, but not all, OE injectors are now made by Delphi, Bosch, Siemens-Deka, JECS, Denso and a few others. Aftermarket injectors are also manufactured by several companies such as Standard Motor Products, BWD, Python and others. Not all aftermarket parts are equal in quality or fit. Some companies, such as Standard Motor Products, manufacture & supply OEM injectors for some vehicles as well as manufacture a complete product line of injectors for other vehicles. This makes SMP an OEM supplier and an Aftermarket company. I know it’s confusing but that’s the way this crazy business works! Ford, GM, Chrysler and other car companies DO NOT make most of the parts for their vehicles. Generally they design, style and manufacture the car’s bodies & engines and contract out the fuel & electrical components as well as electronics & accessories, rubber & plastic molded trim, windshield wiper systems, lighting components, bearings, exhaust systems, suspension parts, wheels, upholstery, and on and on … all to their design specifications. Many years ago the major car companies wholly owned most of their sub-supplier manufacturing plants such as GM’s Divisions: AC (filters & spark plugs), Delco Remy (ignition, starters, alternators & electrical), Rochester (fuel system parts), Packard (wire & cable) ND/Hyatt (bearings) and Morraine (brake systems), etc. But, that’s all changed now. Cars are truly “World Cars” assembled with parts and components manufactured by independent suppliers all around the globe. As previously mentioned, I do not sell any aftermarket parts that are less than OE Quality parts. Absolutely NO cheap Chinese knock-off junk! But it’s out there all over eBay … so Caveat Emptor ... Buyer Beware! One final note regarding fuel injector brands: Delco (now called AC-Delco) is not a fuel injector manufacturer. In fact they no longer make any parts. It is now an independent marketing company, a name on a box only, but is still associated with GM. GM sold off all their wholly-owned parts manufacturing divisions years ago. If you buy a Delco part for a GM built vehicle the part is sourced from the actual OE supplier … therefore it is a Genuine GM part. However, the injector inside a Delco box will be a part made by Bosch, Siemens-Deka, Delphi or other injector manufacturer. Delco parts fitting non-GM built vehicles are purchased from various companies, many of which are simply the lowest cost source for that part, not necessarily the OEM supplier. If you have any questions about any part we list or are concerned about physical appearances or dimensions being different, just email me before ordering for a specific, professional reply. Q) I want to buy your fuel injectors since they are such a great deal but am not sure how to install them. What do you suggest? A) First and foremost, please do not attempt to install fuel injectors if you are not fully capable of the job. These are high-pressure fuel systems and the installation requires skill and technique to avoid damage to the injector o-rings. Most of our buyers are advanced “Do-it-yourselfers” or qualified Professional Installers or they have a friend whose capable of doing the install for them. If you are planning on buying the parts yourself and taking them to a Professional to do the installation, check with the Service Manager or Owner of the repair shop you intend to use and tell them that you intend to supply the parts AND read this message first: Taking your own parts into a Car Dealer or Professional Installer According to Professional Installers taking your own parts into a Car Dealer or Independent Shop is like taking two eggs, four strips of bacon and two pieces of toast into your local restaurant and expecting the meal for next to nothing because you supplied the food. It is considered unethical and is in fact far less profitable for the trade Professionals. They typically make as much profit from the sale of repair parts as they do from the labor, depending on the job, of course. A 50% + profit margin on parts sales is the norm in the auto repair industry and should be expected. Parts purchased through a New Car Dealer are typically higher priced parts vs. those purchased through Aftermarket sources, such as a local major brand auto parts store. Most Car Dealers in metropolitan areas are owned by large corporations or “dealer groups” who likely own several car brand dealerships. They are certainly not dishonest but they couldn’t care less about saving you a penny! Their service bays contribute much of the dealer’s overall profit. And most independent repair shops are also honest, hard working small business owners. But there’s a small percentage of Professional Installers that may resort to less than honest tactics if asked to install parts furnished by the customer. That being the case, if you plan to supply your own parts and have them installed by a commercial repair shop I highly suggest that you tell them in advance, when getting an estimate of repairs, and get all the details in writing. Many shops simply will not install parts supplied by the customer for various reasons, some legitimate, some not. Those few less than honest shops may agree to install your parts … BUT: * There will be NO warranty on the job, whatsoever.* Tell you that the parts you supplied are NOT the right parts or that they’re inferior quality and refuse to install them after your car is in the shop. This leaves you with a disassembled vehicle in their shop and no choice but to buy their parts anyway. * Overcharge you for labor (to cover the lost profit on parts sales)* Install your parts but do so improperly (sabotage?) leaving you in a very bad situation and in the process “teaching you a lesson”. Yes, that HAS actually happened! What I can assure you of, with complete confidence, is that any parts you buy from us are OEM or Equal Quality parts that are 100% correct for the vehicles we have them listed as fitting. The exception would be previously modified vehicles or possible engine swap situations ... which are beyond our crystal ball’s capabilities to divine.
Price: 119 USD
Location: Fairview Heights, Illinois
End Time: 2024-11-12T00:27:46.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Manufacturer Warranty: Yes
California Prop 65 Warning: This product could expose you to, but not limited to, plastic and/or rubber which are known to the state of CA to cause cancer, birth defects or other reproductive harm.
Other Part Number: 12613411-8N
OE/OEM Part Number: 12613411
Performance Part: No
Fuel Type: Gasoline
Country/Region of Manufacture: United States
Interchange Part Number: FJ1061, 67668
Manufacturer Part Number: 12613411
Brand: GM OEM Delphi
Type: Fuel Injector
