RaceFlux Straight Push-Lock Hose End Fitting, 5/16" Barb to -6AN Female

Description: Specifications RaceFlux Part Number: PL-05-06 Size: 5/16'' Barb to -6AN Female Fitting Angle: Straight Connection Types: AN Flare Female, 37º JIC,Hose Barb, Push-Lock Port A: Hose Barb, Push-Lock Port B: AN Flare Female, 37º JIC Tee Port (if applicable): , , Primary Material: 6061-T6 aluminum Finish: Type II Anodized Color: Black O-ring Material (if applicable): Swivel Seal Material (if applicable): Lock Ring Material (if applicable): Operating Conditions Max Operating Pressure: 250 psi (17.24 bar) Max Operating Temp: 302°F (150°C) Min Operating Temp: -40°F (-40°C) Fluid Compatibility: Air and gas,Alcohol,Coolants,Engine oil,Ethanol-based fuels (E85+),Ethanol/gasoline mixtures,Gear oil,Methanol,Nitromethane ,Nitrous Oxide,Power Steering Fluid,Racing fuels,Transmission fluid,Vacuum,Water Applications: Breather and vent lines,Fuel (in-tank),Fuel (outside of tank),Gauge and sensor lines,Hydraulics: low pressure (return lines),Vacuum lines,Other oil water and air systems Description Push-lock hose end fittings are for use with soft rubber hose or "socketless" hose. Hose and fittings are easy to install: they simply push on with some heat and lubricant, and "lock" in place. Fittings are black anodized aluminum. Assembled hose is rated for up to 300°F and 150-300 psi (depending on hose size) when used with RaceFlux PH series hoses. Hose clamps are required to ensure the hose does not back off if used at pressures of 10 psi or higher. These fittings are also useful for converting AN convections to standard rubber hose and vice-versa. Features and Benefits Easy to assemble push-lock style fitting for RaceFlux PH series hose, or other rubber fuel, transmission, and PCV hose. Lightweight black anodized aluminum. 36% lighter than traditional screw-type line fittings.

Price: 6.9 USD

Location: Orlando, Florida

End Time: 2024-01-23T22:10:48.000Z

Shipping Cost: 9.95 USD