Technics SL-1200G-S Direct Drive Turntable Grand class Record 100V NEW Pre

Description: Technics SL-1200G-S Direct Drive Turntable Panasonic Grand class Record LP 100VDescription[Technics' new challenge. A turntable that pursues the sound of a true analog record with the latest direct-drive technology. ● Newly developed coreless direct drive motor that realizes stable rotationThe newly developed coreless direct drive motor uses a coreless stator that eliminates the core from the coils that make up the motor. Since no attractive force is generated between the core and the magnet, the magnetic force does not become uneven, and the occurrence of cogging is theoretically eliminated. It achieves about twice the high torque and reduced bearing load compared to the conventional SL-1200MK6. Furthermore, the clearance between the shaft and the bearing, which are the rotating shafts, has been narrowed to the same level as the SP-10MK2 or less to thoroughly reduce minute vibrations during rotation. In addition, high performance can be maintained for a long period of time by adopting oil impregnated bearings. In addition to excellent performance, it is maintenance-free and has reliability that can be used habitually for a long time. ● High-precision motor control that realizes the optimum rotation stateThe latest motor control technology cultivated in the development of Blu-ray Disc equipment is applied to the rotation control of the motor that verifies and corrects the accuracy of rotation, and strong torque and high stability are realized by performing precise switching according to the operating state. Did. Compared to the motor control of SL-1200MK6, the accuracy of the reference clock has been improved by about 3 times, and more accurate rotation control has become possible in combination with accurate rotation position detection. ● Magnesium tone arm that traces the board surface with high accuracyThe tone arm that follows the rotation of the vinyl record and enables highly accurate signal reading inherits the static balance type universal S-shaped tone arm traditionally adopted by Technics. The SL-1200G uses magnesium, which is lighter and has higher damping characteristics, as the material for the tone arm pipe. By performing cold drawing, we have achieved further improvement in material properties and high dimensional accuracy. ● Gimbal suspension that stably supports the movement of the tone arm without hindering itThe support of the tone arm adopts Technics traditional gimbal suspension structure where the axis of the horizontal rotation axis and the axis of the vertical rotation axis intersect at one point. High-precision bearings using a machined housing are used for the tone arm bearings. Accurately traces the groove carved on the record board. ● Auxiliary weights that can be used with various cartridges are included.It is a pleasure unique to analog playback to enjoy the difference in sound by exchanging cartridges according to the genre of music and mood. SL-1200G comes with 2 types of auxiliary weights. By adding to the balance weight that supports cartridge masses of 5.6 to 12 g, it is possible to handle cartridges of 10 to 16.4 g with a small auxiliary weight and 14.3 to 19.8 g with a large auxiliary weight. We support more cartridges. * Does not include the attached head shell ● Tone arm height adjustment mechanism that precisely matches the height with the board surfaceWith the SL-1200G, the height of the tone arm can be adjusted up to 6 mm according to changes in the cartridge and turntable seat. High hardness brass is used for the base part of the tone arm, and 6 sets of screw grooves for adjustment are carved. Since the tone arm is supported by 6 grooves, high-precision height adjustment is possible. ● Machined brass PHONO terminal for high-purity signal transmissionThe inside of the case of the output terminal part at the bottom of the tone arm adopts a metal shield structure that prevents the influence of external noise. For the PHONO output terminal and PHONO ground terminal, we used a terminal made of machined brass with gold plating. In addition, the AC input terminal is a removable inlet type, and the power cord can be upgraded. ● 4-layer structure housing that achieves vibration resistance and high rigidityWith analog turntables, even the slightest vibration transmitted from the outside becomes noise and causes the reproduced sound to become muddy. Therefore, achieving a high level of vibration resistance and high rigidity is of utmost importance in the housing design of analog turntables. In SL-1200G, in addition to the three-layer structure of the heavy-duty rubber base, BMC (bulk molding compound) chassis, and aluminum die-cast chassis used in the conventional SL-1200MK6, a 10mm thick aluminum top panel has been added. 4 A layered structure is used to ensure high rigidity. ● 10mm thick aluminum top panel that combines high rigidity and high quality finishThe aluminum top panel contributes to improved vibration resistance and high rigidity. In addition, solid aluminum plates are cut one by one and hairline processed. Not only does it improve the performance of the housing, but it also has a high-quality texture that makes you feel more attached to it as you use it. ● Insulator with high damping silicon that blocks external vibrationSL-1200G uses a special silicone rubber that has high vibration damping characteristics and long-term reliability. It absorbs lateral vibration by being reinforced with a cylindrical tube made of microcell polymer. In addition, the mounting part of the insulator is equipped with a screw-type leveling mechanism. It eliminates the rattling that occurs when the turntable is installed on a rack, etc., and prevents the generation of unnecessary vibration. Furthermore, by strictly adjusting the levelness of the platter and the board surface with the horizontal adjustment mechanism, it is possible to eliminate the occurrence of rotation unevenness due to tilting and enable more stable record playback. [SL-1200G spec]● ComprehensivePower supply: AC 100V 50/60 HzPower consumption: 12 W (when power is on) 0.2 W (when power is off)External dimensions (width x height x depth): 453 x 173 x 372 mmMass: Approximately 18.0 kgColor: -S (silver) ● TurntableFormat: Direct drive turntable system (manual)Drive system: Direct driveDrive motor: Brushless DC motorTurntable: Aluminum die-cast / brass integrated type, diameter: 332 mm, mass: approx. 3.6 kg (including rubber sheet)Rotation speed: 33 1/3, 45, 78 r / minRotation speed adjustment range: ± 8%, ± 16%Starting torque: 3.3 kg ･ cmStart-up characteristics: 0.7 s (at 33 1/3 r / min)Brake mechanism: Electronic brakeWow and flutter: 0.025% W.R.M.S. (JIS C5521)Signal-to-noise ratio (rumble): 78 dB (IEC 98A weighted) ● Tone armFormat: Universal S-shaped tone arm Static balance typeEffective arm length: 230 mmOverhang: 15 mmTracking error angle: + 2 ° 32'(30 cm record outer circumference), + 0 ° 32' (30 cm record inner circumference)Offset angle: 22 °Arm height adjustment range: 0 to 6 mmNeedle pressure adjustment range: 0 to 4 g (needle pressure direct reading type)Shell mass: Approximately 7.6 gApplicable cartridge mass: No auxiliary weight / 5.6 to 12.0 g, 14.3 to 20.7 g (including head shell), when using small auxiliary weight / 10.0 to 16.4 g, 18.7 to 25.1 g (including head shell), when using large auxiliary weight / 14.3-19.8 g, 23.0-28.5 g (including headshell)Cartridge mounting dimensions: JIS standard 12.7 mm (1/2 inch) mounting intervalShell terminal lug: 1.2 mmφ 4-pin terminal lug ● AccessoriesTurntable x 1, Turntable sheet x 1, Dust cover x 1, EP record adapter x 1, Balance weight x 1, Auxiliary weight small x 1, Auxiliary weight large x 1, Shell x 1, Overhang gauge x 1, Cartridge mounting screw (1 set) x 1, PHONO cable x 1, PHONO ground wire x 1, power cord x 1, turntable mounting screw (1 set) x 1 *Japanese specification voltage 100V*Please note that it may take some time to ship.ShippingI send a product by DHL or FedEx or Japan Post (EMS/Air Mail).I attach the tracking number.Please bid it without worrying. Shipping is only available to the address registered in ebay.Please note that any address not registered in ebay is not acceptable to ship. Shipping is available from Monday to Friday.Weekends are not available because post office is closed.International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Price: 4200 USD

Location: Hokkaido

End Time: 2024-02-09T12:03:13.000Z

Shipping Cost: 0 USD