Description: 4000W 100A MPPT Solar Charge Controller USB 12V 24V 36V 48V PV Battery Regulator Features:Large LCD display, support battery working status display, solar panel working status display, mode control display, load output status and each parameter display, normal and fault status display.Charging mode, light control mode, light control + time delay control mode, general control mode, manual control mode, timing control mode and test mode, the test mode is only for factory test use.It will automatic identify DC12V/24V, DC36V, DC48V by itself.Use large-section, large-spacing wiring ports, can be installed 16mm wire, the wire spacing of 7mm increases the insulation performance and the reliability of installation, effectively reduces current and voltage drop while reducing losses.The solar charge controller adopts a dual USB charging port design, which can charge two devices at the same time, and supports most of USB port devices, such as mobile phones, tablets, PSP game consoles, etc.The MOS tube is used to lock the heat sink design, the heat dissipation is more uniform, and there is no fear of the temperature rise caused by the MOS tube, the powerful heat dissipation capacity can operate normally in the environment of 55 ℃.Equipped with functions to prevent overcharge, overvoltage, DC output low voltage, high voltage protective and reverse polarity protective, etc. Clock setting instructions:When the battery is connected, press "▲" "▼" to set the clock table, short press "■" to save.Charging voltage setting instructions:After connecting the battery, after setting the clock and saving, long press "▲" for 3-5 seconds, the screen displays L**V as the floating charge voltage, which can be adjusted by pressing "▼"; short press again "▲"H**V is to increase the charging voltage, which can be adjusted by pressing "▼"; shortly press "▲" again. F**V is the low-voltage cut-off voltage of the DC load, which can be adjusted by pressing "▼"; after setting Long press "▲" for 3-5 seconds to save and exit.Specification:Type: Solar Charge ControllerMaximum charging current: 100AMaximum input voltage of photovoltaic panels: 15V-23V(12V), 30V-45V(24V), 45V-69V(36V), 60V-90V(48V)Maximum input power of photovoltaic panels: 1000W (12V), 2000W (24V), 3000W (36V), 4000W (48V)Output voltage: DC12V/24V/36V/48V; DC5V/1.5Ax2USBSupport Battery: Lithium Battery & Lead Acid BatteryWorking temperature: -25℃~55℃Cooling method: heat sink self-coolingCharging method: Focused MPPT modulation chargingWorking mode: sevenProtective function: prevent overcharge, overvoltage/DC output low voltage, high voltage protective, reverse polarity protective, etc.Package Includes:1× Solar Charge Controller1× Manual Listing and template services provided by inkFrog
Price: 35.09 USD
Location: Hayward, California
End Time: 2024-11-03T00:43:28.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Unbranded
System Configuration: Off-Grid
Type: Solar Controller
Current Type: AC/DC
Current Output: 100 A or Greater
Features: Corrosion Resistant, LCD Display, Portable, USB Port, 7 Operation Modes
Application: Back-up Power
Resistance Properties: Corrosion Resistant, Rust Resistant
Charging Mode: MPPT (Maximum Power Point Tracking)
Current Rating: 91-100 A
MPN: Does Not Apply
Wattage: 4000-4499 W
Color: Black
